Canon MultiPASS 800, Инструкция по эксплуатации

Страница: 10 / 51

– 8 –
CAUTIONS
●
Do not set up the scanner on sloping, wobbly or
otherwise unstable surfaces or in locations affected
by excessive vibration. The scanner could cause
injury if it falls over or slides off the surface.
●
Do not block the ventilation slots as this could result
in a fire due to the build up of heat inside the scan-
ner.
●
Do not place vessels containing liquids (cups, vases,
etc.) or small metal objects (paper clips, staples,
necklaces, etc.) on top of the scanner. Liquids or
metal objects falling into the scanner could cause an
electric shock or fire. If any liquids or metal objects
fall into the scanner, immediately switch the scanner
off, unplug the power cord and contact an autho-
rized Canon dealer or service center.
●
Do not set up the scanner in dusty or humid
locations as this could result in an electric shock or
fire.
●
Do not place heavy objects on top of the scanner as
such objects could fall and cause injury.
●
Use only a power supply having the rated voltage.
The use of other voltages could result in a fire or
electric shock.
●
Always unplug the power cord by grasping the plug
itself. Pulling on the power cord can damage the
cord so that the core wires are exposed or snapped
and could cause a fire or electric shock.
●
Do not use an extension power cord as this could
cause a fire or electric shock.
●
Keep the area around the power outlet free of ob-
stacles to ensure that the scanner can be unplugged
quickly in the event of an emergency.
●
Take care not to tip water or flammable solvents
such as alcohol, thinners or benzene into the scanner
as this could result in a fire or electric shock.
●
If the scanner will be left unused for a lengthy
period, always unplug the scanner as a safety mea-
sure.
●
Avoid touching internal scanner components when
you perform routine cleaning or maintenance such
as changing the lamp. Some internal components
generate high temperatures or high voltages. To
avoid injury such as burns or electric shocks, take
care also that metal objects such as necklaces or
bracelets do not come into contact with internal
scanner components.
●
To avoid injury when you are moving the scanner,
take care not to put your hands on the metal
protrusions on the underside of the scanner unit.
Before You Begin...