200
Change the Rewind Movement Settings
When printing is fi nished, the top of the print media stops at the cutter position. In this case,
the print media is sandwiched between the transport roller 2 and the transport roller 3,
and depending on the material of the print media, the part of the print media sandwiched
between the transport rollers may be deformed, causing a "Feed error." If the "Feed error" occurs
repeatedly, try to set the rewind movement to return the top of the print media to the print
head position after printing.
The default setting of the rewind movement is set to "Off ."
Cutter
position
Print head position
1
Press the [Settings] key.
2
Use [ ] or [ ] to select "Others" and press the [Enter] key.
ɻɻ
S e t t i n g s
O t h e r s
P r i n t a d j u s t
S e t t i n g
3
Use [ ] or [ ] to select " Rewind movement," and press the [Enter] key.
Replace cutter
Rewind movement
AutoOff(adapter)
O t h e r s
