![background image](http://html.mh-extra.com/html/canon/microfilm-scanner-500/microfilm-scanner-500_instruction-manual_63037035.webp)
31
SPECIAL FEATURES
The reset feature
The MS500 lets you store your own default settings for the film
mode. Once you have recorded the defaults, you can recall them
at any time by pressing the Reset key. To make best use of this
function, you will want to register your most frequently used val-
ues as your defaults.
Recalling the defaults
To change all settings to their default values, press the Reset key.
Release the key immediately after pressing it. If you hold the key
down longer than 5 seconds, the MS500 switches into default-
entry mode.
Entering the default values
Use the following procedure to set up your default values.
1
. Hold down the Reset key on the keyboard for about 5 seconds.
The lamp next to the key begins to blink, indicating that you can
now enter the default values.
2
. Press the key corresponding to the setting you want to make. For
details about the various functions and their settings, refer to ex-
planations given earlier in this manual.
You cannot select a default value for the Print setting.
In addition to selecting print-mode defaults, you can also use this
feature to record zoom settings, and to reassign the function of
certain keys on the keyboard. Procedures for both of these opera-
tions are given below.
These procedures are available only while the MS500 is set to
default-entry mode (only while the Reset lamp is blinking).
Содержание Microfilm Scanner 500
Страница 47: ......