![background image](http://html.mh-extra.com/html/canon/microfilm-scanner-500/microfilm-scanner-500_instruction-manual_63037020.webp)
16
OPERATING PROCEDURES
OPERATING PROCEDURES
This section describes procedures for normal operation of the unit:
■
Turning the unit on and off.
■
Adjusting the image on the screen to include focusing, enlarging/
reducing, rotating.
■
Printing the image on the screen.
Turning power on/off
Follow the procedure below to turn the unit on and off.
1
. If you have installed an FS Controller III Autocarrier, turn the
controller on first.
2
. On the front of the main unit, locate the power switch on the lower
left corner, then press the
I
side of the switch to turn the power on.
3
. Turn on the power switch of the printer.
After you turn on the power, the Print key indicator on the key-
board lights red and enters the warm-up mode. While the unit is
warming up, you cannot print. After the indicator lights green, the
unit is warmed up and ready to print.
4
. To turn the unit off, press the
O
side of the power switch.
Setting the film
Load the Autocarrier with the film you want to view. For details
about the Autocarrier installation, see the instructions you received
with the Autocarrier.
Содержание Microfilm Scanner 500
Страница 47: ......