Firmware and Installation Instructions for the Focus3D 20/120 and S 20/
120
Quick Steps
The latest version of the
FARO
®
Laser Scanner Focus
3D
S20/120
firmware is
5.5.7.50152
released
15 January, 2017
.
1.
Click here
to download the firmware.
2.
Unzip the firmware file.
3.
Transfer 1_firmware.LsSetup from the computer to the scanner.
4.
Transfer 2_firmware.LsSetup from the computer to the scanner.
5.
Confirm results.
What's New
Download the
Release Notes
to get details about what has changed in the latest version.
Who Needs This Upgrade
If your scanner was serviced by FARO
after 15 January, 2017
, the latest firmware was loaded by the service technician.
You can check the firmware version number to be sure you have the latest.
1. On the scanner, go to
Manage
>
General Settings
>
Scanner Details
.
2. If the firmware version number is
Rev5.5.7.50152
, you have the latest firmware and no further action is necessary.
If you have an earlier version, upgrade the firmware as instructed in this article.
Overview
Without the right firmware installed on your computer, your FARO scanner might not work correctly. When FARO
releases new firmware or FARO
®
SCENE software, you may have to upgrade the firmware installed on your computer
and scanner. The firmware latest version is compatible with any model of the supported hardware
listed here
.
https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Firmware_and_Installation_Instructions_for_the_Focus3D_20-120_and_S20-120
Updated: Mon, 17 Dec 2018 03:13:25 GMT
1
