Canon ME20F-SHN, Руководство по эксплуатации сети

Страница: 110 / 185

110
[External Device Output]
When [24-Hour Continuous Settings] is set to [Disable], select the actions of the external device output at [Start Time] and
[End Time] of a timer.
[Repeat Interval] is not supported.
[Infrared Switching]
When [24-Hour Continuous Settings] is set to [Disable], select the infrared switching behavior when a timer event is
triggered. This can only be set with [Timer 1].
Select [Switch to Normal Capture] to switch to normal capture at the start time, and to the infrared mode at the end time.
Select [Switch to Infrared] to switch to the infrared mode at the start time, and to normal capture at the end time.
[Repeat Interval] is not supported.
Important
• If you set [Start Time] and [End Time] and select a preset with [Start Time Preset], the infrared setting of [Infrared] (P. 84) registered in
[Camera] > [Preset] is given priority. Therefore, even if you set [Infrared Switching] to [Switch to Normal Capture] or [Switch to
Infrared], the [Infrared Switching] setting will be disabled if the opposite setting has been configured in [Preset] > [Camera Settings].
• When the [Infrared Switching] setting switches the modes between normal capture and infrared, camera control privileges are
released, even if the user has obtained those camera control privileges using the Camera Viewer or other camera control applications.