Canon ME20F-SHN, Руководство по эксплуатации сети

Страница: 81 / 185

Sett
ing Page
4
81
Configure settings such as video quality compensation. If you change settings, the changes are immediately reflected in
the video display area and Viewer.
Note
When a power zoom lens is attached, (Zoom in) / (Zoom out) buttons are displayed. For information on the button operation,
please refer to P. 47.
Adjusting the Focus
The camera offers two focusing methods: one-shot AF and manual focus.
Clicking on the side of video display automatically adjusts the focus once, and then switches to the manual mode.
You can click and hold the (Near) and (Far) buttons to adjust the focus in the near and far directions.
The following procedure enables you to adjust the focus appropriately.
1. Select [Av] in [Camera Mode], and move the iris slider to the left limit to fully open the aperture. The depth of field
becomes shallow, and you can adjust the focus appropriately.
2. To adjust the focus, click and hold the [Far] or [Near] button in [Adjust Focus], or click [One-shot AF].
3. When you have finished adjusting the focus, change [Camera Mode] to an appropriate setting.
Set the focus mode switch on the attached lens to AF or SERVO in advance.
Difficult to Focus with One-shot AF
[Camera] > [Camera]
Configuring Video Settings
The following settings can be configured here.
• Adjusting the Focus
• Camera Settings
• Custom Picture
Reflective
surfaces Subjects with low
contrast or without
vertical lines Through dirty or
wet windows Fast moving
subjects Low-light scenes