Canon ME20F-SHN, Руководство по эксплуатации сети

Страница: 127 / 185

Sett
ing Page
4
127
If a moving object crosses the detection line in the selected direction, it will be detected as ‘passed’.
A preview display shows the selected passing direction on the detection line in the video display area.
If the selected decision point crosses the detection line, it will be detected as ‘passed’.
The decision point is indicated by a cross on the detection frame of the moving object.
Set the size ratio of moving objects for the entire screen.
If the moving object exceeds the set value for [Object Size (%)], it will be targeted for passing detection.
When the setting values or slider is changed, an indicator representing the object size is shown for one second in
the center of the video display area allowing you to check the size ratio while specifying the setting.
Note
A ratio of up to 30% can be set in [Object Size (%)] for passing detection.
Detection Status for Passing Detection
All moving objects detected are displayed with white profile lines.
When the [Decision Point] of a moving object that meets the [Object Size (%)] setting crosses a detection line in the
direction specified in [Passing Direction], the profile line changes to the same color as the detection line, and the
status becomes “detected”.
Notification of a passing detection event occurs only when the decision line is crossed. Take care in setting the
operation to be performed when an event occurs.
2
In [Passing Direction], select the direction for moving objects to pass the detection line.
3
In [Decision Point], select the point of a moving object that will be used for triggering passing detection when the
moving object crosses a detection line.
4
Configure the size of the moving object needed for triggering detection in [Object Size (%)].
Important
Perform a detection test after configuring passing detection to make sure the detection frame of a moving object continues to be
displayed.
Passing direction (both directions)
Detection Frame
Decision point (bottom center)
Detection line
Object Size Indicator