manualshive.com logo in svg

Canon LBP351 Series, Руководство по обслуживанию

Принтер Canon LBP351 Series - надежное устройство для быстрой и качественной печати. На нашем сайте вы можете бесплатно скачать руководство пользователя на русском языке. Получите всю необходимую информацию, чтобы использовать ваш принтер максимально эффективно. Загрузите мануал с manualshive.com.

Поделиться
Скачать
background image

No.

Messages

Timing of dis-

play

Cause

Remedy

12

An error occurred.
Check the Update
Firmware screen.

Manual update
(main screen) Au-
tomatic update
(main screen)

After the update, failed to
connect to the delivery
server.

Check the network environment and re-execute the job.
If it recurs, obtain the log etc. (Refer to "System Manage-
ment Operations" under “Version Upgrade”of "Updater" in
“Troubleshooting” of this manual.) and contact Support Div.
of the sales company.

After the update, delivery
server stopped.

Contact the sales company's Support Department. After
confirming restoration of the delivery server, re-execute the
job.
If it recurs, obtain the log etc. (Refer to "System Manage-
ment Operations" under “Version Upgrade”of "Updater" in
“Troubleshooting” of this manual.) and contact Support Div.
of the sales company.

After the update, the net-
work cable was disconnec-
ted.

Re-connect the network cable and re-execute the job.
If it recurs, obtain the log etc. (Refer to "System Manage-
ment Operations" under “Version Upgrade”of "Updater" in
“Troubleshooting” of this manual.) and contact Support Div.
of the sales company.

After the update, server re-
turned an error.

Obtain the log etc. (Refer to "System Management Opera-
tions" under "Version Upgrade"of "Updater" in "Trouble-
shooting" of this manual.) and contact Support Div. of the
sales company.

After the update, an internal
error occurred.

If it recurs, obtain the log etc. (Refer to "System Manage-
ment Operations" under "Version Upgrade"of "Updater" in
"Troubleshooting" of this manual.) and contact Support Div.
of the sales company.

13

Delivery Error
Error Code: [xxx]

UGW linkage
(Update Firmware
screen)

eRDS sent an order but Up-
dater failed to connect to
the server.

Conduct a communication test to analyze the cause of the
error. After solving the cause, resend the order from the
eRDS.
If it recurs, obtain the log etc. (Refer to "System Manage-
ment Operations" under “Version Upgrade”of "Updater" in
“Troubleshooting” of this manual.) and contact Support Div.
of the sales company.

The delivery server stop-
ped.

Contact the sales company's Support Department. After
confirming restoration of the delivery server, re-execute the
job.
If it recurs, obtain the log etc. (Refer to "System Manage-
ment Operations" under “Version Upgrade”of "Updater" in
“Troubleshooting” of this manual.) and contact Support Div.
of the sales company.

The scheduled data and
time acquired from delivery
server does not exist.

Do the delivery setting from UGW again.
If it recurs, obtain the log etc. (Refer to "System Manage-
ment Operations" under “Version Upgrade”of "Updater" in
“Troubleshooting” of this manual.) and contact Support Div.
of the sales company.

14

Delivery Error
Delivery Time
Delivery Firmware
Label
Delivery Firmware
version
Error Code: [ xxx ]

UGW linkage
(Update Firmware
screen)

The scheduled date and
time acquired from delivery
server was before current
time (15 or more min had
passed).

Do the delivery setting from UGW again.
If it recurs, obtain the log etc. (Refer to "System Manage-
ment Operations" under “Version Upgrade”of "Updater" in
“Troubleshooting” of this manual.) and contact Support Div.
of the sales company.

Immediate down-
load (Update
Firmware screen)

At the time of immediate
download, turned OFF and
then ON the power of de-
vice main body.

Re-execute the job.
If it recurs, obtain the log etc. (Refer to "System Manage-
ment Operations" under “Version Upgrade”of "Updater" in
“Troubleshooting” of this manual.) and contact Support Div.
of the sales company.

15

Applicable firm-
ware is not regis-
tered.

On-site (error dia-
logue)

At the user site, no latest
firmware exists.

This means the current firmware is the latest, so this error
has no impact.
But when the latest firmware to be retrieved must exist e.g.
released new firmware information has been notified, con-
tact Field Support Group in the sales company.

No applicable firmware ex-
ists on CDS, so the service
person can't select any ap-
plicable firmware.

Contact the sales company's Support Department.

3. Technical Explanation (System)

59

Содержание LBP351 Series
































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LBP351 Series

Panasonic KX-MC6260E Quick Reference Manual preview
KX-MC6260E
Бренд: Panasonic Страницы: 24
Oki 10i Help Manual preview
10i
Бренд: Oki Страницы: 40
Panasonic Workio DP-1820E Quick Manual preview
Workio DP-1820E
Бренд: Panasonic Страницы: 38
Samsung SCX-4300 - SCX 4300 B/W Laser Installation Instructions preview
SCX-4300 - SCX 4300 B/W Laser
Бренд: Samsung Страницы: 4
Samsung ML-2240 - 23 Ppm Mono Laser Printer Manual preview
ML-2240 - 23 Ppm Mono Laser Printer
Бренд: Samsung Страницы: 16
Samsung ML 2510 - B/W Laser Printer User Manual preview
ML 2510 - B/W Laser Printer
Бренд: Samsung Страницы: 170
Samsung CLX-3185FN Manual Del Usuario preview
CLX-3185FN
Бренд: Samsung Страницы: 165
Xerox 770 System Administration Manual preview
770
Бренд: Xerox Страницы: 114
Oki T400 Guía De Instalación preview
T400
Бренд: Oki Страницы: 36
Samsung Xpress M2020W User Manual preview
Xpress M2020W
Бренд: Samsung Страницы: 199
Ricoh Aficio MP C6503SP User Manual preview
Aficio MP C6503SP
Бренд: Ricoh Страницы: 264
Xerox AltaLink B8145 User Manual preview
AltaLink B8145
Бренд: Xerox Страницы: 418
Partner RP-330 Technical Manual preview
RP-330
Бренд: Partner Страницы: 81
SANEI ELECTRIC SK1-21 Technical Manual preview
SK1-21
Бренд: SANEI ELECTRIC Страницы: 60
A&D AD-8116 Instruction Manual preview
AD-8116
Бренд: A&D Страницы: 8
Xante ScreenWriter Colour ScreenWriter User Manual preview
ScreenWriter Colour ScreenWriter
Бренд: Xante Страницы: 446
CognitiveTPG Blaster ADVANTAGE User Manual preview
Blaster ADVANTAGE
Бренд: CognitiveTPG Страницы: 20
Xerox Phaser 3140 Service Manual preview
Phaser 3140
Бренд: Xerox Страницы: 284

Бренды по названию

Популярные бренды

Загрузить еще бренды