Error Code
Title
Detection description
Remedy
E245-1012
Host machine
FRAM write error
Host machine FRAM write er-
ror was detected.
1. Replace the Main Controller PCB.
E245-1013
Host machine
FRAM write error
Host machine FRAM write er-
ror was detected.
1. Replace the Main Controller PCB.
E245-1021
Host machine
FRAM write error
Host machine FRAM write er-
ror was detected.
1. Replace the Main Controller PCB.
E245-1022
Host machine
FRAM write error
Host machine FRAM write er-
ror was detected.
1. Replace the Main Controller PCB.
E245-1023
Host machine
FRAM write error
Host machine FRAM write er-
ror was detected.
1. Replace the Main Controller PCB.
E245-2012
FLASH write error FLASH write error was detec-
ted.
1. Replace the Main Controller PCB.
E245-2022
FLASH write error FLASH write error was detec-
ted.
1. Replace the Main Controller PCB.
E246-0001
System error
System error
Contact the sales company.
E246-0002
System error
System error
Contact the sales company.
E246-0003
System error
System error
Contact the sales company.
E246-0004
System error
System error
Contact the sales company.
E246-0005
System error
System error
Contact the sales company.
E247-0001
System error
System error
Contact the sales company.
E247-0002
System error
System error
Contact the sales company.
E247-0003
System error
System error
Contact the sales company.
E247-0004
System error
System error
Contact the sales company.
E350-1001
System error
System error
Contact the sales company.
E350-1002
System error
System error
Contact the sales company.
E350-1003
System error
System error
Contact the sales company.
E350-3000
System error
System error
Contact the sales company.
E354-0001
System error
System error
Contact the sales company.
E354-0002
System error
System error
Contact the sales company.
E355-0001
System error
System error
Contact the sales company.
E355-0003
System error
System error
Contact the sales company.
E602-0001
Insufficient SD
Card capacity
Capacity of the installed SD
Card is smaller than the size
of the area used for the sys-
tem.
1. Check the capacity of the SD Card. 2. Replace the SD Card with
another one with 2 GB or more capacity.
E602-0002
Firmware error
Loading of Bootable ends in
failure.
1. Reinstall the firmware. 2. Replace the Main Controller PCB.
E602-0003
SD Card access er-
ror
Error caused by hardware
(such as damage on the sec-
tor, etc.) occurred when ac-
cessing to the SD Card during
execution of Boot ROM
1. Turn OFF and then ON the main power. 2. Back up data, and
format the SD Card. 3. Replace the SD Card. 4. Replace the Main
Controller PCB.
E602-0006
Firmware error
Loading of Subbootable ends
in failure.
1. Reinstall the firmware. 2. Replace the Main Controller PCB.
E602-0007
Firmware error
Damage on the internal file
1. Reinstall the firmware. 2. Replace the Main Controller PCB.
E602-0008
The memory area
in the Main Control-
ler is depleted.
Remaining memory area in
the Main Controller is small.
* Turning OFF and then ON the main power stops the error code to
be displayed, but the continuous use causes the memory area in the
Main Controller PCB to be completely used up or causes symptoms
such as machine freeze. 1. Replace the Main Controller PCB.
E602-0009
MEAP cannot be
started.
MEAP cannot be started due
to an error caused by invalid
power down.
Select Function.gr > MEAP > MEAP FUNCTION = ON, and turn OFF
and then ON the main power. * Since the installed MEAP application
and its management information are all cleared after reboot, MEAP
needs to be reinstalled.
E602-1102
File system could
not be initialized
normally (MEAP-
related).
File system could not be ini-
tialized normally (MEAP-rela-
ted).
Turning OFF and then ON the main power executes auto recovery.
Since E616-0001 may be displayed in some cases, execute the
remedy for E616-0001. * When this error occurs, the firmware down-
loaded by the CDS Updater will be lost.
8. Error/Jam/Alarm
157
Содержание LBP351 Series
