Canon IXUS 245 HS, Руководство пользователя

Страница: 258 / 284

258
On‑Screen Messages
A camera error was detected ( error number)
• If this error message is displayed immediately after a shot, the image may not have
been saved. Switch to Playback mode to check for the image.
• Frequent display of this error message may indicate camera damage. In this case,
write down the error number ( Exx ) and contact a Canon Customer Support Help
Desk.
File Error
• Correct printing (
=
232) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is
connected to the printer.
Print error
• Check the paper size setting ( = 236). If this error message is displayed when the
setting is correct, restart the printer and complete the setting on the camera again.
Ink absorber full
• Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
Wireless LAN
Connection failed
• No access points were recognized. Check the access point settings (
=
60).
• A device could not be found. Turn the camera off and on again, and retry the
connection.
•
Check the device you want to connect to and make sure it is ready for connection.
Cannot determine access point
• The WPS button on numerous access points were pressed simultaneously. Try
reconnecting again.
No access points found
• Check to make sure that the access point is turned on.
• When connecting to an access point manually, make sure that you entered the
correct SSID.
Incorrect wireless LAN encryption key/Incorrect wireless LAN security
settings
• Check the access point security settings (
=
60).
IP address conflict
• Reset the IP address so that it does not conflict with another.
COP
Y