Canon iR4570 Series, Руководство по обслуживанию

Страница: 710 / 876

*8 02 A file system error has
occurred.
The system software is designed so that a
recovery session will not run for the boot
partition unless you use safe mode in
combination with the SST.
1. Start up in safe mode, and execute full
formatting using the SST and re-install the
system software (System, Language,
RUI). Thereafter, turn off and then on the
main power.
2. If the symptom still exits after the
foregoing, suspect a fault on the HDD, and
replace the HDD and re-install the system
software.
*9 03 There is poor contact of the
HDD, or a v.x Works system
error has occurred.
1. Check the cable and power supply
connectors.
2. If the symptom still exits after the
foregoing, start up in safe mode, and
execute full formatting using the SST and
re-install the system software (System,
Language, RUI). Thereafter, turn off and
then back on the main power.
3. If the symptom still exits after the
foregoing, suspect a fault on the HDD, and
replace the HDD and re-install the system
software.
*10 11,21 The HDD has poor contact. This type of error is highly rare in relation
to read/write operations.
1. Check the cable and the power supply
connectors.
2.If the symptom still exits after the
foregoing, suspect a fault on the HDD, and
replace the HDD and install the system
software.
YY Description Remedy