iPF8400S Basic Guide
146
Er
ror M
essa
ge
Me
ssa
ges
r
egar
ding
pr
inti
ng
or
a
djus
tm
ent
Messages regarding printing or adjustment
Cannot execute this command. Use other paper. ........................................................................................ 146
Cannot calibrate. .......................................................................................................................................... 146
Excessive temperature or humidity. ............................................................................................................. 146
Please execute common calibration. ............................................................................................................ 146
Please commn calibrt using above paper. .................................................................................................... 147
Please calibrate using above paper. ............................................................................................................ 147
Borderless printng not possible. Paper stretched or shrank. ........................................................................ 147
Before borderless printing, move the blue platen switch. ............................................................................. 148
Blue platen switch is dirty. ............................................................................................................................ 148
Move the blue platen switch No.xx to the right. (xx represents a number) ................................................... 148
Cannot adjust paper feed. ............................................................................................................................ 148
Check printed document. ............................................................................................................................. 148
Cannot execute this command. Use other paper.
Cause
Corrective Action
Paper compatible with color
calibration is not loaded.
1. Press the
OK
button to clear the error.
2. Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See "Paper Reference Guide.")
Always make sure the loaded paper matches the type of paper in the printer paper settings.
Adjustment cannot be completed correctly unless the loaded paper matches the settings.
Cannot calibrate.
Cause
Corrective Action
The paper for printing a test pattern is soiled. Otherwise,
you have loaded colored paper.
Press the
OK
button to clear the error.
Load unused paper compatible with color calibration.
(See "Paper Reference Guide.")
The test pattern was printed too faintly.
Press the
OK
button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.")
➔
P.113
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction.
Press the
OK
button to clear the error.
Take steps to ensure the printer is not used when exposed
to direct sunlight or strong lighting.
Excessive temperature or humidity.
Cause
Corrective Action
The temperature or humidity
where the printer is installed is out
of the acceptable range for
operation.
Press
▲
or
▼
to select
Stop
, and then press the
OK
button to stop printing.
Use the printer under suitable environmental conditions. Also note that various
environmental conditions are recommended for various types of paper. For details on
the recommended environmental conditions, see the Paper Reference Guide.
(See "Paper Reference Guide.")
Please execute common calibration.
Cause
Corrective Action
There is not even one Common calibration execution result.
Execute Common calibration.
