19
19
Others > For Support Guide
Others > For Support Guide
Check After Installation
Operation Check
1) Plug in the host machine and turn the main power switch ON.
2) Make several test copies in the staple mode and punch mode.
3) Confirm there is no abnormality in operation and output.
Others
For Support Guide
The support guide is put away in the reverse side of the tray. Though it is no need to use the
support guide usually, the two effects described in the next page are expected by attaching
the support guide. However a paper jam may occur when the support guide is used improper.
According to the user’s environment, attach the support guide to the auxiliary tray during the
installation of the finisher, if necessary.
Support guide
<How to install the support guide>
Pull out the tandem auxiliary trays and attach the support guide on it.
Auxiliary trays
F-1-47
F-1-48
