9
9
Installation Procedure > Installing the Punch Unit in the Host Machine
Installation Procedure > Installing the Punch Unit in the Host Machine
6) Hold the parts as instructed in the fi gure and set the punch unit in the host machine.
CAUTION:
Pay attention that the punch cable harness should not be caught in hardwareand
release the harness towards the main power switch.
F-1-19
7) Fix the punch unit to the host machine.
• 1 screw (RS Tightening; M3x8)
x1
8) Attach the fixing plate included in the inner finisher carton to the punch unit.
• 1 screw (RS Tightening; M3x8)
x1
NOTE:
The fixing plate comes behind the front frame of the punch unit.
(Internal thread is in the fixing plate.)
F-1-20
F-1-21
