10
10
Installation Procedure > Installing the Inner Finisher in the Host Machine
Installation Procedure > Installing the Inner Finisher in the Host Machine
9) Attach the eddge saddle at frame edge as shown and put the punch cable harness in the
saddle.
NOTE:
Do not use another wire saddle provided in the same plate as it is used for the other
optional equipment.
F-1-22
Installing the Inner Finisher in the Host Machine
1)Fix the rail unit
• Front: 2 screws (RS Tightening; M3x8)
• Rear: 2 screws (Screw with washer, already set on the rail unit)
NOTE:
Position of the rail unit is fixed by 3 points at rear side.
2 screws with washer are already set at rear side of the rail unit.
Fix the rail unit to the rear frame in the condition with washers.
x4
Screw with washer
F-1-23
