manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 584

COPYRIGHT© 2001 CANON INC. 

2000 2000 2000 2000

 CANON iR8500 REV.0 MAR. 2001

SERVICE MODE

S-87

COPIER>OPTION

DRUM-IDL

Use it to set idle rotation mode of the photosensitive drum at power-on.

By initiating idle rotation of the photosensitive drum, fusion of toner
to the drum may be avoided. Set it to 1 through 4 if the images are
distorted or too light.

Setting

0: do not execute idle rotation (default)
1: execute idle rotation for 30 sec if absolute moisture content is 18 g or

more

2: execute idle rotation for 2 min if absolute moisture content is 18 g or

more

3: execute idle rotation for 30 sec regardless of environment
4: execute idle rotation for 2 min regardless of environment

FX-FANSW

Use it to switch fixing heat discharge fan control.

Setting it to ‘1’ will use half-speed control for the fan after copying/
printing.

Setting

0: Full speed (default)
1: Half speed

CONFIG

Use it to select multiple pieces of firmware stored on the hard disk to switch
between countries, languages, destinations, and paper sizes.

Setting

XXYYZZAA
XX: country, YY: language, ZZ: destination, AA: paper size configura-
tion. The mode of indication is as selected by
COPIER>DISPLAY>USER>LANGUAGE.

<Using the Mode>
1) Select CONFIG.
2) Select the item to change to highlight, and press the +/- key.

The items that may be changed are XX (00; country) and AA (00; pa-
per size configuration).

3) See that each press on the +/- key changes the indications in sequence.
4) Bring up the appropriate description for all items, and press the OK key.
5) Turn off and then on the main power switch.

SHARP

Use it to change the sharpness level of the image.
• A higher setting makes the image sharper.

Setting

1 to 5 (default: 3)

FDW-DLV

Use it to set face-down delivery for multiple-page printing.

Setting

0: normal (face-up delivery for all if for single original)
1: face-up delivery for one set of prints of single original; face-down de-

livery for multiple sets (default)

Memo

Memo

Service_5.p65

01/03/14, 9:40

87

Содержание ImageRunner iR8500 Series
















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды