manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 276

COPYRIGHT© 2001 CANON INC.

 2000 2000 2000 2000 

CANON iR8500 REV.0 MAR. 2001

CHAPTER 6 TROUBLESHOOTING

6-1

1 Guide to the Troubleshooting Tables

The troubleshooting tables used in this chapter are based on commonly found trouble-

shooting flow charts; study the following for an idea of how to use the tables:

EX: The AC power is absent.

Power plug

1) Is the power plug connected?

NO:

Connect the plug.

Covers

2) Is the front cover closed properly?

NO:

Close the cover.

Main power supply

3) Is the rated voltage present at the outlet?

NO:

The problem is not of the copier. Advise the user.

----------

4) Is the rated voltage present between J1-1 and J1-2? (J1 is found

near the power cord base.)

YES: Go to step 6).

Rest omitted.

„

To find out the possible cause (faulty part) of a specific problem, see the “Cause” column
of the table. In the case of the above, i.e., “absence of AC power,” suspect that the power
plug may be disconnected, the front cover may not be closed properly, or the main power
supply is absent.

„

To find out checks to make and actions to take for a specific problem, make the check
indicated under “Checks” and answer the question in terms of “YES” or “NO”; if yes,
take the action indicated, otherwise, go to the next step.

Chap_06_1.p65

01/03/13, 18:10

1

Содержание ImageRunner iR8500 Series
















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды