manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 174

COPYRIGHT© 2001 CANON INC. 

2000 2000 2000 2000

 CANON iR8500 REV.0 MAR. 2001

CHAPTER 5 MAINTENANCE AND INSPECTION

5-28

8) Slide out the scanner motor unit [5] to

the front, and detach the belt; then, de-
tach the scanner motor unit.

REF.

When mounting it, set the ten-
sion of the belt to 10 ±2N
(1 ±0.2 kgf).

F05-502-03

5.2.2 Scanner Drive Cable

a. Adjusting the Tension of the Scanner Drive Cable

When routing the scanner drive cable, be

sure to have a mirror positioning tool (FY9-
3040-000) ready.
1) Remove the ADF.
2) Remove the right glass retainer.
3) Remove the copyboard glass.
4) Open the front cover, and remove the

inside upper cover and the inside cover
(AP kit).

5) Remove the control panel.
6) Remove the rear cover and the rear up-

per cover.

7) Remove the inverter PCB unit.
8) Move the No. 1 mirror base to where

the cable fixing [1] of the No. 1 mirror
base is in view through the hole in the
machine side plate.

[1]

Front

[5]

F05-502-04

F05-502-05

[1]

Rear

Chapter_05_2.p65

01/03/13, 14:41

28

Содержание ImageRunner iR8500 Series
















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды