manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 351

COPYRIGHT© 2001 CANON INC.

 2000 2000 2000 2000 

CANON iR8500 REV.0 MAR. 2001

CHAPTER 6 TROUBLESHOOTING

6-82

3.3.4 The copy has uneven density (darker front)
3.3.5 The copy has uneven density (lighter front)

----------

1) Perform the Image Adjustment Basic Procedure. Is the problem

corrected?

YES: End.

Developing assembly (position)

2) Are the developing members of the developing assembly in firm

contact with the photosensitive drum?

NO:

Check the developing assembly locking unit.

Scanner (dirt)

3) Clean the scanning lamp, reflecting plate, side reflecting plate, mir-

ror, lens, and dust-proofing glass. Is the problem corrected?

YES: End.

Pre-exposure lamp

4) Is the pre-exposure lamp ON evenly during copying operation?

NO:

1. Replace the pre-exposure lamp.
2. Replace the DC controller PCB.

Developing assembly, Charging assembly, Copy paper

5) Is the developing cylinder coated evenly with toner?

NO:

1. Clean the tip f the blade of the developing assembly (dry wiping)
2. Clean the surface of the developing cylinder.
3. Check to find out if the toner inside the developing assembly is

uneven.

YES: 1. Clean all the charging wires once again, and check the position

of each charging wire.

2. Try different copy paper.
3. Check the nip width of the fixing roller.

Chap_06_6.p65

01/03/13, 18:25

82

Содержание ImageRunner iR8500 Series
















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды