manualshive.com logo in svg

Canon ImageRunner iR8500 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon ImageRunner iR8500 Series Скачать руководство пользователя страница 167

COPYRIGHT© 2001 CANON INC. 

2000 2000 2000 2000

 CANON iR8500 REV.0 MAR. 2001

CHAPTER 5 MAINTENANCE AND INSPECTION

5-21

8) Insert a ruler [6] between the magnet

roller [4] and the scraper [5], and move
it back and forth from the front to the
rear and then from the rear to the front
to pulverize lumps of waste toner.

9) Turn the magnetic roller [4] to make

sure that the coating of waste toner is
even.
If it is as follows, repeat step 8):
• The coating is uneven in the form of

lines.

• The coating has dents in parts.
• The coating has clumps of toner.

F05-402-07

10) Remove the cleaning blade from the

cleaning blade assembly.

11) Butt the turned or replaced cleaning

blade [7] against the rear of the blade
retaining plate [8] while keeping the
edge flush.

When butting the blade, be sure
to use your fingers to keep it
firmly in contact.

F05-402-08

[4]

[5]

[6]

[7]

[8]

Flush.

Chapter_05_1.p65

01/03/14, 11:06

21

Содержание ImageRunner iR8500 Series
















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды