Canon imageRUNNER C1335 Series, Руководство по обслуживанию

Страница: 566 / 607

8
8
8-127
8-127
Service Mode > FAX > List of NUM
Service Mode > FAX > List of NUM
List of MENU
Menu switch registration mode
No. Parameter Selection
01 - 05 Not in use
06 Telephone line monitor 0 - 3
0: DIAL
1: SERVICEMAN1
2: SERVICEMAN2
3: OFF
07 Transmission level (ATT) 0 - 15
08 Upper limit of V.34 modulation speed 0 - 5
0: 3429 BAUD
1: 3200 BAUD
2: 3000 BAUD
3: 2800 BAUD
4: 2743 BAUD
5: 2400 BAUD
09 Upper limit of V.34 data speed 0-13
0: 33.6 kbps
1: 31.2 kbps
2: 28.8 kbps
3: 26.4 kbps
4: 24.0 kbps
5: 21.6 kbps
6: 19.2 kbps
7: 16.8 kbps
8: 14.4 kbps
9: 12.0 kbps
10: 9.6 kbps
11: 7.2 kbps
12: 4.8 kbps
13: 2.4 kbps
10 OFF Hook signal frequency 0-2
0: 50 Hz
1: 25 Hz
2: 17 Hz
11 - 20 Not in use
T-8-65
List of NUM
Numeric parameter setting mode
No. Parameter Allowable setting range
01 Not in use
02 RTN transmission criteria X 1 to 99 %
03 RTN transmission criteria n 2 to 99 times
04 RTN transmission criteria m 1 to 99 lines
05 NCC pause (before ID code) 1 to 60 sec
06 NCC pause (after ID code) 1 to 60 sec
07 Not in use
08 STORED_DIAL_MODE wait timer 0 to 65 sec
09 Not in use
10 T.30 T0 timer 55 sec principally
11 T.30 T1 timer (for incoming transmission) 0 to 9999
(France: 3500, Others: 3000)
12 Maximum incoming lines 0 to 65535 (line)
0: without limitation
13 T.30 EOL timer 500 to 3000
(set to 55 sec by default)
14 Not in use
15 Threshold between hokking nad on-hook 0 to 999
16 Lead time to the first response when switching between FAX
and TEL
0 to 9
17 Duration to activate pseudo-RBT cadence 0 to 999
18 Duration to deactivate pseudo-RBT cadence (short) 0 to 999
19 Duration to deactivate pseudo-RBT cadence (long) 0 to 999
20 Duration to activate pseudo-ring cadence 0 to 999
21 Duration to deactivate OFF Hook cadence (short) 0 to 999
22 Duration to deactivate OFF Hook cadence (long) 0 to 7
23 Not in use
24
Not in use
25 CNG monitor duration while the answering device is
activated
0 to 999
26 Not in use
27
Not in use
28 Not in use
29 Off-hook PCB duty settings
(For NAC, setting can be made with SPL71100 in special
management mode.)
20 (*10ms)
30 - 48 Not in use
49 NSX MODEL ID 0 to 4095
50 Not in use
51 Threshold to detect hook 10 to 9999
52 Not in use
53 Set DTMF calling counts when receiving FAX remotely 10 to 9999 (default 25)