Canon imageRUNNER C1335 Series, Руководство по обслуживанию

Страница: 508 / 607

8
8
8-69
8-69
Service Mode > COPIER > ADJUST > BLANK
Service Mode > COPIER > ADJUST > BLANK
COPIER> ADJUST> CST-ADJ
CST-VLM4 Adj Cassette 4 level detect threshold VL
Details To adjust the timing to switch the scale indicating paper level in the
Cassette 4 from “3” to “2”.
As the value is larger, switching of the level display becomes earlier.
For example, if you prefer to switch the scale when paper level reaches
25 mm instead of 15 mm, place a stack of papers which height is
approx. 25 mm in the cassette and then increase the setting value by 1
at a time until the scale becomes “2”.
If the scale is switched although paper level is 40 mm, place a stack
of papers which height is approx. 35 mm in the cassette and then
decrease the setting value by 1 at a time until the scale becomes “3”.
If the value that satisfy both of the above conditions is set, the scale is
switched when paper level is in the range of 25 to 35 mm.
Use case Upon user’s request (to individually adjust the timing to switch the
paper level display)
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press Start key.
2) Pull out and then insert the cassette.
Caution • The setting is reflected after removing and then installing the
cassette.
• When the value is increased/decreased greatly, the actual timing
may be deviated from the target. Therefore, change the value by 1 at
a time while checking the scale.
Display/adj/set range -4 to 4
Appropriate target value 0
Default value
0
Supplement/memo The timing to switch the scale of paper level from “3” to “2” varies (9
to 40 mm) due to individual difference of the motor. With this item, the
variation is corrected.
Since paper levels corresponding to the other scales can be detected
almost correctly, there is no need to adjust the timing of switching.
T-8-22
■
BLANK
COPIER> ADJUST> BLANK
BLANK-T Adjustment of leading edge margin
Details To adjust the margin on the leading edge of paper.
As the value is incremented by 1, the margin is increased toward the
center of the paper by 1 pixel (0.0423mm).
Use case • When reducing the margin upon user’s request
• When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method Enter the setting value, and then press Start key.
Caution
Do not use this at the normal service.
Output the service mode setting values by P-PRINT beforehand.
Display/adj/set range 0 to 1000
Unit 1 pixel
Default value 94
BLANK-B Adjustment of trailing edge margin
Details To adjust the margin on the trailing edge of paper.
As the value is incremented by 1, the margin is increased toward the
center of the paper by 1 pixel (0.0423 mm).
Use case • When reducing the margin upon user’s request
• When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method Enter the setting value, and then press Start key.
Display/adj/set range
0 to 1000
Unit 1 pixel
Default value 59
BLANK-L Adjustment of left edge margin
Details To adjust the margin on the left edge of paper.
As the value is incremented by 1, the margin is increased toward the
center of the paper by 1 pixel (0.0423 mm).
Use case • When reducing the margin upon user’s request
• When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method Enter the setting value, and then press Start key.
Display/adj/set range
0 to 1000
Unit 1 pixel
Default value 59
BLANK-R Adjustment of right edge margin
Details To adjust the margin on the right edge of paper.
As the value is incremented by 1, the margin is increased toward the
center of the paper by 1 pixel (0.0423 mm).
Use case • When reducing the margin upon user’s request
• When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method Enter the setting value, and then press Start key.
Display/adj/set range
0 to 1000
Unit 1 pixel
Default value 59
T-8-23