Canon IMAGERUNNER ADVANCE C5045, Руководство по обслуживанию

Страница: 69 / 1131

2
2
2-45
2-45
Primary charging
Overview
This machine uses the roller charging method for primary transfer.
To prevent image fault (white spot/missing image) caused by residual toner, the cleaning
brush roller is added to clean the primary charging roller.
Photosensitive
drum
Primary charging
roller
Cleaning brush
roller
Drum
cleaner
■
●
F-2-71 F-2-71
Primary charging bias control
To charge the surface of photosensitive drum to be uniform negatively-charged potential
The primary charging bias (AC+DC negative), generated by HVT1/2 PCB, is applied to the
primary charging roller.
DC controller(UN1)
AC + DC negative
HVT1 /2(UN16/17)
Photosensitive
drum
Primary charging roller
Cleaning brush roller
Discharge current control
To apply optimal primary charging bias according to the environmental change or use
condition of photosensitive drum
Execution timing
1) When the power is turned ON, at sleep recovery
2) At post-rotation after the total reaches 250 prints (see Note1)
Note1: The total print is counted separately between the color mode and the Bk mode. This
control is executed when the counter of either mode reaches the specified number.
Detection description
To detect the current monitoring value of the primary charging AC bias
●
●
F-2-72 F-2-72