manualshive.com logo in svg

Canon IMAGERUNNER ADVANCE C5045, Руководство по обслуживанию

Canon IMAGERUNNER ADVANCE C5045 - мощный многофункциональный принтер с возможностью сканирования и копирования. Чтобы получить бесплатное Руководство по обслуживанию, загрузите его с {веб-сайта}. Не упустите возможность получить подробную информацию о вашем устройстве.

Поделиться
Скачать
background image

2

2

2-134

2-134

 

 

The Active Directory subnet is assumed to be the same subnet as the device sub-net. 

In the Active Directory addresses, the Active Directories of the same site are listed. 
Active Directories of the same subnet as the device are listed first. 
If there is no Active Directory with the same subnet as the device, Active Directories 

belonging to different subnets than the device are listed. 

The Active Directories within the same site are accessed in order. Note, however, 
that where there are multiple Active Directories within the same site, access to those 
Active Directories will be in the order in which the address list was obtained. 
If there is no Active Directory within the same site, if access outside of the site is 
programmed, Active Directories outside of the site will be accessed in the order in 
which the address list was obtained.

•
•
•
•

•

•

Site list acquisition

After booting up, upon the first login by LLS or ILS/ RLS, the site list is obtained from the 
Active Directory. In order to obtain the site list from the Active Directory, Active Directory 
needs to be accessed in LDAP, so SASL-Kerberos-Bind is used by the login user account. If 
authentication by Active Directory should fail, an authentication error will be generated and 
the site list will be acquired again from Active Directory upon the next login.

In SSO-H, the Active Directory to be accessed when acquiring the site list cannot be 
specified. In other words, if there is no site list, which site's Active Directory is accessed 
depends upon the order of the Active Directory addresses returned by DNS. Therefore, when 
acquiring the site list, LDAP may access the Active Di rectory of a different site. Therefore, in 
such cases, it is sometimes necessary to access across sites or subnets, which means that 
LDAP protocol needs to have continuity across sites (subnets) (normally, LDAP is port No. 
389). Further, if connection with Active Directory fails when acquiring site information, another 
Active Directory will be accessed.
Site information, once it has been acquired, is cached within the device. The life settings of 
the cache can be set so that site information in the cache is updated upon the first login after 
the device boots up, or so that the cache is not updated once acquired.

Settings for access mode in sites

Switching between site internal access mode/ non site internal access mode, as well as 
detailed mode settings, are done via DMS or iWEMC. Site internal access mode settings 
window (DMS)

 

The figure below shows a sample of processing Access Mode in Sites.

Sample of Processing Access Mode in Sites

Domain X

SSO-Tokyo

172.24.12.80

DC-Tokyo/DNS

172.24.12.2

SSO-Tokyo

192.168.1.90

DC-Osaka/DNS

172.168.1.2

SSO-Tokyo

DC-Hakata/DNS

211.111.1.30

211.111.1.3

WAN

WAN

Repllicatio

n

Repllicatio

n

Site:Tokyo

172.12.12.0/24

172.24.35.0/24

Site:Osaka

192.168.1.0/24

Site:Hakata

211.111.1.0/24

DNS Server A

records:

AD 192.168.1.2

AD 172.24.12.2

AD 172.24.35.2

AD 211.111.1.30

SSO-Tokyo  172.24.12.80

SSO-Osaka  192.168.1.90

SSO-Hakata 211.111.1.3

Site:Tokyo::

172.24.12.0/24

172.24.35.0/24

Site:Osaka::

192.168.1.0/24

Site:Hakata::

211.111.1.0/24

1. When making initial

  settings, obtain site list

     and ascertain which 

        site the device

            belongs to.

4.Access Active

Directory of same

site

4.Access Active

Directory of same

site

1. When making initial

  settings, obtain site list

     and ascertain which 

        site the device

            belongs to.

2.Get Active

Directory list

2.Get Active

Directory list

3. Access Active

  Directory of same

    subnet

3. Access Active

  Directory of same

    subnet

 

1) SSO-Tokyo acquires site lists from Active Directories.

Note, however, that the Active Directories accessed in order to acquire site lists are in the 
order in which they were returned by DNS, so there is no guarantee that the same Active 
Directory will be accessed as in the initial settings (upon device settings or changes to NW 
settings, etc.).

[Site subnet list] 

Site: Tokyo: = 172.24.12.0/24, 172.24.35.0/24 

F-2-209

F-2-209

F-2-210

F-2-210

Содержание IMAGERUNNER ADVANCE C5045












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IMAGERUNNER ADVANCE C5045

Canon 1510 Installation Procedure preview
1510
Бренд: Canon Страницы: 12
Canon iR1020 Series Quick Start Manual preview
iR1020 Series
Бренд: Canon Страницы: 62
Canon imageRUNNER C475iF III Faq Manual preview
imageRUNNER C475iF III
Бренд: Canon Страницы: 92
Canon C400D Specification preview
C400D
Бренд: Canon Страницы: 2
Canon AM1 Service Manual preview
AM1
Бренд: Canon Страницы: 59
Canon Image Runner iRC1028i User Manual preview
Image Runner iRC1028i
Бренд: Canon Страницы: 15
Canon AK1 Operation Manual preview
AK1
Бренд: Canon Страницы: 62
Canon 8461A062 Operator'S Manual preview
8461A062
Бренд: Canon Страницы: 60
Canon iR2000 Series Reference Manual preview
iR2000 Series
Бренд: Canon Страницы: 194
Canon AK1 Service Manual preview
AK1
Бренд: Canon Страницы: 70
Canon imageCLASS MPC200 Service Manual preview
imageCLASS MPC200
Бренд: Canon Страницы: 122
Canon NP6012 Service Manual preview
NP6012
Бренд: Canon Страницы: 253
Canon iR1020 Series Service Manual preview
iR1020 Series
Бренд: Canon Страницы: 304
Canon iR2000 Series Service Manual preview
iR2000 Series
Бренд: Canon Страницы: 738
Canon CLC 10 Service Manual preview
CLC 10
Бренд: Canon Страницы: 330
Canon iR2200 Series Service Manual preview
iR2200 Series
Бренд: Canon Страницы: 768
Canon iR105 Series Service Manual preview
iR105 Series
Бренд: Canon Страницы: 1029
Canon imagePRESS 1110 Service Manual preview
imagePRESS 1110
Бренд: Canon Страницы: 1603

Бренды по названию

Популярные бренды

Загрузить еще бренды