Canon imageRUNNER ADVANCE C350 series, Руководство по обслуживанию

Страница: 947 / 1173

8
8
8-177
8-177
Service Mode > COPIER > OPTION > ACC
Service Mode > COPIER > OPTION > ACC
COPIER> OPTION> ACC
SRL-SPSW Setting of Serial I/F Kit support
Lv.1 Details To set the support level of the Serial Interface Kit.
To keep processing performance of printer engine, select “1: Priority
on speed”.
To correctly stop the output by the upper limit number of sheets,
select “2: Priority on upper limit number of sheets”.
Use case At installation of Serial Interface Kit
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution With priority on speed, output cannot be correctly stopped by the
upper limit number of sheets.
With priority on the upper limit number of sheets, processing
performance of the printer engine is decreased depending on pickup
location.
Display/adj/set range 0 to 2
0: No support, 1: Priority on speed, 2: Priority on upper limit number
of sheets
Default value 0
PDL-THR Norm PDL print set: External charge mode
Lv.2 Details To set the normal PDL print process when the external charge mode
6/7 is set in COIN.
When “0” is set, a job is canceled. When “1” is set, a job is executed.
Use case When executing normal PDL print in external charge mode
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Cancel, 1: Execute
Default value 0
Related service mode COPIER> OPTION> ACC> COIN
CR-TYPE Setting of Card Reader
Lv.1 Details To set the model of the Card Reader.
Set 1 in the case of connecting the Card Reader-C1. It operates
even 0 is set, but recognition rate decreases.
Use case When connecting the Card Reader-C1
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Card Reader-F1, 1: Card Reader-C1
Default value 0
COPIER> OPTION> ACC
OPCST-BA Set Cst Pedestal not connect error stop
Lv.2 Details To set whether to stop the error that occurs when the Cassette
Pedestal has not yet been connected.
When 1 is set, the error does not occur even though operation check
is performed only for the host machine.
Use case When performing operation check for the host machine with no
option cassette connected at the time of installation
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Be sure to return the value to 0 before the machine is used by the
user.
Display/adj/set range 0 to 1
0: Normal, 1: Error not displayed
Default value 0
T-8-53