Canon imageRUNNER ADVANCE C350 series, Руководство по обслуживанию

Страница: 926 / 1173

8
8
8-156
8-156
Service Mode > COPIER > OPTION > NETWORK
Service Mode > COPIER > OPTION > NETWORK
COPIER> OPTION> NETWORK
CHNG-STS Set of TOT status connection port number
Lv.2 Details To set the port number for status connection with T.O.T.
Use case When the Service NAVI is used
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 65535
Default value 20010
Related service mode COPIER> OPTION> NETWORK> STS-PORT
CHNG-CMD Set of TOT command connection port No.
Lv.2 Details To set the port number for command connection with T.O.T.
Use case When the Service NAVI is used
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 65535
Default value 20000
Related service mode COPIER> OPTION> NETWORK> CMD-PORT
MEAP-SSL HTTPS port setting of MEAP
Lv.2 Details To set the port of HTTPS server in the case of using SSL with HTTP
of MEAP.
Use case When specifying the setting of HTTPS port for MEAP
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 65535
Default value 8443
LPD-PORT Setting of LPD port number
Lv.2 Details To set the LPD port number.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 65535
Default value 515
Supplement/memo LPD port: Network port for TCP/IP communication when making
prints through network.
WUEV-SW Setting of sleep notification execution
Lv.2 Details To set whether to notify the sleep mode to the application
(imageWARE, etc) on the network when shifting to/recovering from
the sleep mode.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Notified, 1: Not notified
Default value 0
COPIER> OPTION> NETWORK
WUEV-INT Setting of sleep notification interval
Lv.2 Details To set the interval of sleep notification.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution This is active when COPIER> OPTION> NETWORK> WUEV-SW is
set to 0: Notified.
Display/adj/set range 60 to 65535
Unit 1 second
Default value 600
Related service mode COPIER> OPTION> NETWORK> WUEV-SW
WUEV-POT Port number setting for sleep notice
Lv.2 Details To set port number of the PC to notify the sleep mode.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution This is active when COPIER> OPTION> NETWORK> WUEV-SW is
set to 0: Notified.
Display/adj/set range 1 to 65535
Default value 11427
Related service mode COPIER> OPTION> NETWORK> WUEV-SW
WUEV-RTR Setting of sleep notification range
Lv.2 Details To set the number of available routers to the target for sleep
notification.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution This is active when COPIER> OPTION> NETWORK> WUEV-SW is
set to 0: Notified.
Display/adj/set range 0 to 254
Default value 3
Related service mode COPIER> OPTION> NETWORK> WUEV-SW
WUEN-LIV Recovery time setting after sleep notice
Lv.2 Details To set the time from the sleep start from network without job
assignment until the mode is shifted to the sleep mode.
Use case When setting the startup time after sleep notification
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 600
Unit 1 second
Default value 15