manualshive.com logo in svg

Canon imageRUNNER ADVANCE C350 series, Руководство по обслуживанию

Поделиться
Скачать
Canon imageRUNNER ADVANCE C350 series Скачать руководство пользователя страница 553

6

6

6-42

6-42

Troubleshooting > Version Upgrade > Version Upgrade using USB Memory Storage Device > Formatting FLASH PCB or HDD

Troubleshooting > Version Upgrade > Version Upgrade using USB Memory Storage Device > Formatting FLASH PCB or HDD

 

●

[3]: Upgrade (Overwrite all)

Regardless of the system software version in the machine, all the system software in the USB 
memory storage device is downloaded.
This machine is automatically restarted once writing process is completed. When writing 
process is successfully completed, the machine is restarted with the new version of the 
system software. When an error occurs, the machine is restarted with the previous version of 
the system software.

NOTE:

All firmware update may take up to 25 minutes. To reduce downtime, we recommend 

using Auto under normal condition.

Operation Procedure

1) Enter download mode.

2) Connect the USB memory storage device to the USB port.

3) Press [1] and select the version of system software to be used on the screen for selecting 

version.

4) Select [3]: Update (Overwrite all) to start downloading.

[3] - [0]: Execute download/ any key other than [0]: Return to the menu screen
During the download process, download status is displayed on the control panel.

When download is completed, this machine is automatically restarted to start writing to the 
system software in the FLASH PCB. When writing to the Dcon (ACC1, CCM or CCB if there 
is an option) is completed, the machine is automatically restarted. After writing of SafeCont is 
completed, the machine is automatically restarted again.

5) When the main menu is displayed, press the removal key at the bottom right on the touch 

panel and select removal of memory media device, and then remove the USB memory 

storage device.

 

■

Formatting FLASH PCB or HDD

 

●

Format Overview

The following 3 types of formatting/initialization methods are available with this machine. With 
this machine, there is no function to format BOOTDEV only, which was available with the 

existing machines.

•  Disk Format: To initialize the entire HDD
•  Flash Format: To initialize the entire FLASH PCB
•  HDD Encryption Board Initialize: To initialize the HDD Encryption Board

For normal version update, there is no need to format the FLASH PCB/ HDD.

F-6-64

Содержание imageRUNNER ADVANCE C350 series






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды