Canon imageRUNNER ADVANCE C350 series, Руководство по обслуживанию

Страница: 936 / 1173

8
8
8-166
8-166
Service Mode > COPIER > OPTION > USER
Service Mode > COPIER > OPTION > USER
COPIER> OPTION> USER
IFAX-SZL Setting of IFAX send size limit
Lv.2 Details To set for restricting data size at the time of IFAX transmission that
does not go through the server.
With the setting to restrict the data size, there will be #830 error in
the case of sending data that exceeds the upper limit value.
In the case that the data goes through the server, the size of
transmission data is always restricted.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Limited, 1: Not limited (Restriction applies when data goes through
the server.)
Default value 1
Related UI menu Function Settings> Send> E-Mail/I-Fax Settings> Maximum Data
Size for Sending
Supplement/memo Specify the upper limit value for transmission data size in Settings/
Registration.
IFAX-PGD Set page split TX at IFax Simple mode TX
Lv.2 Details To set to enable/disable split-data transmission on a page basis in
the case that the transmission size in IFAX Simple mode exceeds
the upper limit value.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution In the case to enable split-data transmission, be sure to get approval
from the user by explaining the following:
- No guarantee for page order on the reception side
- There is a possibility of interruption of other received jobs between
pages
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
Related UI menu Function Settings> Send> E-Mail/I-Fax Settings> Maximum Data
Size for Sending
Supplement/memo Specify the upper limit value for transmission data size in Settings/
Registration.
COPIER> OPTION> USER
MEAPSAFE Setting of MEAP safe mode
Lv.2 Details To set safe mode for MEAP platform.
MPSF is displayed on the Control Panel in safe mode.
In safe mode, MEAP application is stopped while just the system
application, which starts with initial state, is activated. This mode
enables obtaining log for cause analysis of MEAP failure.
Use case Perform system recovery processing when MEAP platform fails to
be activated due to resource confliction between MEAP applications,
service registration or use order
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Normal mode, 1: Safe mode
Default value 0
AFN-PSWD Access limt set to Settings/Registration
Lv.2 Details To set to restrict password entry when accessing to Settings/
Registration.
With this setting is enabled, password entry of system administrator
is required after pressing Settings/Registration key.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Password is not required, 1: Password is required
Default value 0
PTJAM-RC Auto reprint setting at PDL print jam
Lv.2 Details To set to automatically restart printing after jam recovery that occurs
with PDL print.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not automatically reprinted, 1: Automatically reprinted
Default value 1