Canon imageRUNNER ADVANCE C350 series, Руководство по обслуживанию, Страница: 438 / 1173

4
4
4-131
4-131
Disassembly/Assembly > Image Formation System > Removing the Hopper Unit (Y/M/C/Bk) > Procedure
Disassembly/Assembly > Image Formation System > Removing the Hopper Unit (Y/M/C/Bk) > Procedure
■ Preparation (for the Hopper Unit (Bk))
1) Remove the Rear Cover 1 (Refer to page 4-35) .
2) Remove the Left Upper Cover (to be removed for models equipped with a fax)
(Refer to page 4-37) .
3) Remove the Fax Speaker Unit (to be removed for models equipped with a fax)
(Refer to page 4-105) .
4) Remove the Fax Unit (to be removed for models equipped with a fax)(Refer to page 4-105) .
5) Remove the Main Controller Unit (Refer to page 4-84) .
6) Remove the Low-voltage Power Supply PCB Unit(Refer to page 4-97) .
7) Remove the DC Controller PCB Unit (Refer to page 4-91) .
8) Remove the Main Drive Unit (Refer to page 4-127) .
9) Remove the Waste Toner Container (Refer to page 4-112) .
10) Remove the Toner Container (Y/M/C/Bk) (remove the toner container of the color to be
removed) (Refer to page 4-113) .
11) Remove the Drum Unit (Y/M/C/Bk) (remove the Drum Unit of the color to be removed)
(Refer to page 4-113) .
12) Remove the ITB Unit (Refer to page 4-115) .
■ Procedure
NOTE:
In this procedure, the procedures for the Hopper Unit (Bk) are described.
Perform the same procedure for removing the Hopper Unit (Y/M/C).
CAUTION:
Perform work carefully so as not to scatter the toner when disassembling/assembling.
F-4-332
1) Remove the Hopper Unit (Bk) [2] while holding the Open/Close Shutter [1].
• 1 Screw [3]
• 2 Bosses [4]
[1]
[2] [3]
[4]
1x
F-4-333