Canon imageRUNNER ADVANCE C350 series, Руководство по обслуживанию

Страница: 900 / 1173

8
8
8-130
8-130
Service Mode > COPIER > OPTION > FNC-SW
Service Mode > COPIER > OPTION > FNC-SW
COPIER> OPTION> FNC-SW
CRG-FANR Adj Drum-U Exhst Fan airflow amnt: print
Lv.2 Details To set the rotation speed of the Drum Unit Exhaust Fan during
printing.
When 2 is set, the heat exhaust efficiency is improved so
temperature rising can be controlled. However, noise becomes
louder.
Use case When the machine shifts to temperature rising prevention mode
frequently in case of continuous output for a long time
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Noise becomes louder.
Display/adj/set range 0 to 2
0: Automatic, 1: Half speed, 2: Full speed
Default value 0
CRG-FANF Adj Drum-U Suctn Fan airflow amnt: print
Lv.2 Details To set the rotation speed of the Drum Unit Suction Fan during
printing.
When 2 is set, the heat exhaust efficiency is improved so
temperature rising can be controlled. However, noise becomes
louder.
Use case When the machine shifts to temperature rising prevention mode
frequently in case of continuous output for a long time
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Noise becomes louder.
Display/adj/set range 0 to 2
0: Automatic, 1: Half speed, 2: Full speed
Default value 0
ECO-TMP Setting of eco mode shift temperature
Lv.2 Details To set the offset value of temperature to shift to eco mode.
When the Environment Sensor detects that the temperature drops to
the specified temperature, the machine enters eco mode and the fan
stops.
Decrease the value when any problem (sticking of delivered papers
together, toner adhesion, etc.) occurs in eco mode. (The machine is
more likely to be recovered from eco mode.)
To reduce the drive noise from the fan, increase the value. (The
machine is more likely to enter eco mode.)
Use case - When changing the temperature to shift to eco mode
- When any problem (sticking of delivered papers together, toner
adhesion, etc.) occurs in eco mode
- Upon user’s request (to reduce fan drive noise)
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -10 to 10
Unit 1 deg C
Default value 0
COPIER> OPTION> FNC-SW
STP-TMP Temp rise prev mod stop seq temp thrshld
Lv.2 Details To set the threshold value of the temperature of the Developing
Assembly to execute temperature rising prevention mode stop
sequence.
Decrease the value when any problem (toner adhesion, etc.) occurs.
Use case - When changing the temperature to execute temperature rising
prevention mode stop sequence
- When any problem (toner adhesion, etc.) occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 50
Default value 48
2TR-TBLS Set sec transfer bias correction table
Lv.1 Details To set the secondary transfer bias correction table.
Since physical characteristics of paper are different between
paper for Japan and it for other countries, secondary transfer bias
correction table is used according to the market.
If the table and paper type are not matched, mottled image may
occur.
Set 1 when using paper for overseas (outside Japan) in Japan. Set 0
when using paper for Japan in other countries.
Use case - When using paper for overseas (outside Japan) in Japan
- When using paper for Japan in other countries
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: For Japan, 1: For others
Default value JP:0, USA:1, EUR:1, AU:1, CN:1, KR:1, TW:1, ASIA:1
Related UI menu Adjustment/Maintenance> Adjust Image Quality> Image Adjustment
Mode for Solid Area