Canon imageRUNNER 6570, Справочное руководство

Страница: 178 / 600

Additional Functions Settings Table 4-10
4
Cust
om
iz
in
g
Set
ti
ng
s -
C
o
m
m
on
Set
ti
ng
s
■
Timer Settings
*1 Indicates the default setting.
*2 Information that is delivered when the Device Information Delivery Settings mode is set, is marked with a "Yes" in
the "Delivered" column. However, device information cannot be delivered if the System Manager ID and System
Password registered in the client machine are different from the System Manager ID and System Password
registered in the host machine.
■
Adjustment/Cleaning
*1 Indicates the default setting.
*2 Information that is delivered when the Device Information Delivery Settings mode is set, is marked with a "Yes" in
the "Delivered" column. However, device information cannot be delivered if the System Manager ID and System
Password registered in the client machine are different from the System Manager ID and System Password
registered in the host machine.
*3 Indicates items that appear only when the appropriate optional equipment is attached.
Item Settings Delivered *2
Applicable
Page
Time Fine
Adjustment 00:00 to 23:59, in one minute
increments
No p. 5-2
Auto Sleep Time
10 sec., 1, 2, 10, 15
*1
, 20, 30, 40,
50 min., 1 hour, 90 min., 2, 3,
4 hours Yes p. 5-4
Auto Clear Time
0 (Off) to 9 minutes, in one minute
increments; 2 min.
*1
Yes p. 5-5
Time Until Unit
Quiets Down
0 (Off) to 9 minutes, in one minute
increments; 1 min.
*1
Yes p. 5-6
Daily Timer Settings
Sunday to Saturday, 00:00 to 23:59, in
one minute increments
Yes p. 5-8
Item Settings
Delivered
*2
Applicable
Page
Zoom Fine
Adjustment
X, Y: -1.0% to +1.0%, in 0.1%
increments; 0.0%
*1
No p. 5-11
Saddle Stitcher
Staple
Repositioning
*3
Press [Start] No p. 5-13
Saddle Stitch
Position Adjustment
*3
All paper sizes: -2.0 mm to +2.0 mm,
in 0.25 mm increments; 0.00 mm
*1
Yes p. 5-15
Exposure
Recalibration Copy/Inbox, Send:
Light, Dark: 1 to 9 levels; 5
*1
No p. 5-17
Numbering/Date/
Watermark Position
Adjust.
X, Y: -5/16" to +5/16" (-8 mm to
+8 mm); 0 mm
*1
Yes p. 5-19
Feeder Cleaning Press [Start] No p. 5-21
Wire Cleaning Press [Start] No p. 5-23