Canon imageRUNNER 5570, Сетевое руководство

Страница: 108 / 274

Setting Up a Computer for Printing/Sending a Fax (Windows/UNIX) 3-62
3
Using a TCP/IP
N
e
tw
or
k
NOTE
If you are using Windows NT 4.0, you can set LPD by using the standard service of
your operating system (Microsoft TCP/IP), without installing Canon LPR2. In this
case, you cannot set Raw. For instructions on how to install the Microsoft TCP/IP
Printing service, see steps 1 and 2 of "Installing a New Driver," on p. 3-60. For
instructions on how to change ports using the Microsoft TCP/IP Printing service,
see steps 2 to 9.
2
On the [Start] menu, point to [Settings]
➞
click [Printers].
3
Right-click the icon of the printer you installed
➞
click
[Properties].
4
Click the [Ports] tab to display the [Ports] sheet.
5
Click [Add Port] to open the [Printer Port] dialog box.
6
From [Available Printer Ports], select [LPR Port]
➞
click [New
Port].
The [Add LPR compatible printer] dialog box opens.
IMPORTANT
If [LPR Port] is not displayed, you need to install the Microsoft TCP/IP Printing
service.
Click [Cancel] to close all dialog boxes
➞
install the Microsoft TCP/IP Printing
service. After installing, start again from step 2.
For instructions on how to install the Microsoft TCP/IP Printing service, see steps 1
and 2 in "Installing a New Driver," on p. 3-60.
7
Enter the IP address or printer host name in [Name or address
of server providing lpd].