manualshive.com logo in svg

Canon imageRUNNER 2520 Series, Руководство по обслуживанию, Страница: 326 / 402

Поделиться
Скачать
Canon imageRUNNER 2520 Series Скачать руководство пользователя страница 326

5. Set the supplied paper size label.

<500-sheet cassette:>
Set the supplied paper size label as shown below so that
the indication of the label can be the size of the paper
loaded in the cassette.

<550 sheets cassette>

<250-sheet cassette>
Affix the cassette size label corresponding to the size of
the paper to be loaded in the cassette to the cassette
size plate. Insert the cassette size plate into the cassette
as shown.

CAUTION:

For the double-cassette (standard) model, load paper
in the other 550-sheet cassette and push in the
cassette in the same manner as for the first cassette.

A4

<250 sheets cassette>

6. Load paper in the cassette, and then push in the

cassette.

7. When a cassette pedestal is used, set up the

cassettes with reference to the Cassette Pedestal
Installation Procedure.

 Installing Other Parts

■ Attaching Handle Covers

1. Attach the two supplied handle covers.

■ Affixing the ADF Label (only for the
standard model with an ADF)

1. If the following labels are supplied, go through the

steps described below.

• Document size label
• Finger pinch caution label 1
• Finger pinch caution label 2

2. Align the side guide (rear) with the A4/A3 mark.

A4/A3

9. Installation

316

Содержание imageRUNNER 2520 Series



















































































































































































































































































































































































































Отзывы:

Нет отзывов