manualshive.com logo in svg

Canon imageRUNNER 2520 Series, Руководство по обслуживанию, Страница: 267 / 402

Поделиться
Скачать
Canon imageRUNNER 2520 Series Скачать руководство пользователя страница 267

NOTE:

Be sure to enter the value on service label when replacing the CCD unit.
Be sure to enter the numeric value on copyboard glass when replacing the copyboard glass.
If changing the setting value of this item, be sure to write down the changed value on the service label.

● #SCAN> READER> ADJUST> CCD> W-PLT-Y

White label data (Y) entry with standard white plate

This item must not be normally used.

NOTE:

Be sure to enter the value on service label when replacing the CCD unit.
Be sure to enter the numeric value on copyboard glass when replacing the copyboard glass.
If changing the setting value of this item, be sure to write down the changed value on the service label.

● #SCAN> READER> ADJUST> CCD> W-PLT-Z

White label data (Z) entry with standard white plate.

Execute this mode only when necessary. Do not execute it when unnecessary.

NOTE:

Be sure to enter the value on service label when replacing the CCD unit.
Be sure to enter the numeric value on copyboard glass when replacing the copyboard glass.
If changing the setting value of this item, be sure to Note the changed value on the service label.

● #SCAN> READER> ADJUST> CCD> SH-TRGT

Shading target value of the standard white plate (backup)

This item must not be normally used.

● #SCAN> READER> ADJUST> CCD> DFTAR-R

Shading target value (RED) entry when using DF (normal document scanning position)

This item must not be normally used.

● #SCAN> READER> ADJUST> CCD> DFTAR-G

Shading target value (GREEN) entry when using DF (normal document scanning position)

This item must not be normally used.

● #SCAN> READER> ADJUST> CCD> DFTAR-B

Shading target value (BLUE) entry when using DF (normal document scanning position)

This item must not be normally used.

● #SCAN> READER> ADJUST> CCD> DFTAR-K

Black shading target value when using DF

This item must not be normally used.
In case of image fault (due to chart soil, etc) after executing:
SCAN > READER > FUNCTION > CCD > DFWLVL1/ DF-WLVL2; enter the factory measurement value using this mode.

● #SCAN > READER > ADJUST > PASCAL > OFST-P-K

Density adjustment at test print scanning

Execute offset adjustment for test print scanning signal in PASCAL control at auto gradation correction. (full correction)

● #SCAN> READER> FUNCTION> INSTALL> STRD-POS

Auto adjustment of CCD/CIS reading position in stream reading

When installing the DF, or removing the ADF and reinstalling it.

● #SCAN> READER> FUNCTION> CCD> CCD-ADJ

Gain adjustment of analog processor block

When installing the DF, or removing the ADF and reinstalling it.
Reflect the LED lamp beam on the standard white plate to correct CCD shading.

8. Service Mode

257

Содержание imageRUNNER 2520 Series



















































































































































































































































































































































































































Отзывы:

Нет отзывов