Canon imageRUNNER 2520 Series Скачать руководство пользователя страница 114 | Manualshive

Страница: 114 / 402

Canon imageRUNNER 2520 Series Скачать руководство пользователя страница 114

Causes: Initial settings or network conditions is incomplete.
Remedy1:

1. Check network connections

Is the status indicator LED for the HUB port to which the main unit is connected ON?
YES: Proceed to Step 2).
NO: Check that the network cable is properly connected.

2. Confirm loop back address

a) Settings/ Registration > System Settings > Network Settings > TCP/ IP Settings > IPv4 Settings > PING Command. Input
127.0.0.1, and touch the Start button.

Is the response from the host displayed?
YES: Proceed to Step 3).
NO: There is a possibility that the main unit's network settings are wrong. Check the details of the IPv4 settings once more.

3. Confirmation from another PC connected to same network.

a) Request the user to ping the main unit from a PC connected to same network.
Does the main unit respond?
YES: Proceed to Step 4).
NO: Confirm the details of the main unit's IP address and subnet mask settings.

4. Confirm DNS connection

a) Settings/ Registration > System Settings > Network Settings > TCP/ IP Settings > IPv4 Settings > DNS Server > DNS
Server Address Settings, and note down both the primary and secondary DNS server addresses.

b) Press Reset key.

c) Settings/ Registration > System Settings > Network Settings > TCP/ IP Settings > IPv4 Settings > PING command. Input
the primary DNS server noted down in step a) as the IP address, and then touch Start.

Is the response from the host displayed?
YES: Proceed to Remedy2.
NO: Input the secondary DNS server noted down in step a) as the IP address, and then touch Start.

Is the response from the host displayed?
YES: Proceed to Remedy2.
NO: There is a possibility that the DNS server address is wrong. Reconfirm the
address with the user's system administrator.

Remedy2: Troubleshooting using communication log
a) Enter Servicemode > #E-RDS > COM-LOG, and the following communication log will be displayed. Maximum 5 records are
logged.

No:1 Ecode:840F2003

2009 01/09 17:27

b) Select a log line and touch OK, then move on to log details.

2. Technical Explanation

104

«
...
112
113
114
115
116
...
»

Содержание imageRUNNER 2520 Series



















































































































































































































































































































































































































Отзывы:

Нет отзывов