Canon imageRUNNER 1019 Series, Основное руководство по эксплуатации

Страница: 230 / 262

14-33
Machine Settin
g
s
*** This setting is available only if the bar code printing function is activated.
1. UNIT OF
MEASURE
Selects the unit of measurement to specify a custom paper
size.
– INCHES
– MILLIMETERS
2. X DIMENSION Specifies the horizontal size of the custom paper.
(05.00–14.00" (127–356 mm))
3. Y DIMENSION Specifies the vertical size of the custom paper.
(03.00–08.50" (76–216 mm))
8. APPEND CR TO LF Sets whether to append a carriage return (CR) when line
feed code (LF) is received.
NO The print head moves down to the next line when line feed
code is received, and the margin does not change (such as
the beginning of the next line).
YES The print head moves to the beginning of the next line when
line feed code is received.
9. ENLARGE A4 Sets whether to expand the printable area of A4 size paper
to that of Letter size in width.
* This setting is applicable for A4 paper and portrait orientation for
the PCL5 printing only. The PCL6 printing is not supported.
OFF All the area on a page
1 /
8
" (4.23 mm) from the top, bottom,
left, and right edges is available for printing on A4 paper.
ON All the area on a page
1 /
8
" (4.23 mm) from the top and
bottom edges and
1 /
8
" (3.30 mm) from the left and right
edges is available for printing on A4 paper. Only the width
increases.
10.BarDIMM*** Sets whether to use the bar code printing function.
ENABLE Sets the bar code printing function to on.
FreeScape: ~, ", #, $, /, \, ?, {, }, |, OFF
DISABLE Sets the bar code printing function to off.
11.RESET PRINTER Clears all print jobs in progress and resets the printer
function.
– OFF
– ON
PRINTER SETTINGS