Canon imagePROGRAF W2200S, Руководство по установке

Страница: 26 / 133

Setting Up the Printer
14
1-14
Important
7
Hold the new printhead by its grips (a) and remove it from its case,
then remove the first orange protective cap (b). While pressing inward
on the tabs (d) of the second protective cap (c) as shown in the
illustration, pull down to remove.
z
The nozzles under protective cap 2 (c) are covered with ink for their protection.
Handle the printhead carefully to avoid touching these nozzles or dropping the
printhead and causing ink stains.
z
When handling the printhead, always hold it by the grips (a) on the left and right
sides.
z
To prevent poor printing results, never touch the exposed nozzles (e) or electrical
contacts (f) on the printhead. The illustration below shows the insert side facing up.
z
Never try to re-attach the protective caps or packing material removed from the
printhead. Discard these items immediately in compliance with local regulations
regarding the disposal of such items.
a
b
c
d
d
e
f