Canon imagePROGRAF iPF6400SE, Руководство пользователя

Страница: 71 / 684

• Although it normally prints borderless on the top, bottom, left, and right (4-edge borderless), in the following cases,
it becomes borderless only on the left and right (2-edge borderless) because the top and bottom of the printed
image are not automatically cut.
• When paper where the borderless printing is described as two edges only in the Paper Reference Guide
(paper where printed image areas cannot be cut cleanly) is selected
• When the following settings are made in the printer control panel
• Cutting Mode is Manual
•
CutDustReduct. is On
• When auto cut is configured as not performed in the printer driver
Important
•
When printing without borders, be certain to set the blue switch on the platen to the ● side. If the switch is set incor-
rectly, print quality may deteriorate.
(See "
Setting the Blue Switch on the Platen
.")
➔
P.626
•
Borderless printing is not possible if details such as crop marks and margins are included as data on the periphery of
the original.
•
If the length of the image to print is short, then since the roll paper is fed out to a prescribed length before cutting in
order to prevent cutting problems and ejection problems, the trailing edge of the roll paper might not be printed bor-
derless.
•
If you use an A1 orA2 roll for borderless printing, insert the provided Spacer for Borderless Printing onthe Roll Hold-
er.
(See "
Loading Rolls on the Roll Holder
.")
➔
P.363
If you do not attach the Spacer for Borderless Printing,the Platen maybe soiled from borderless printing.
•
These features cannot be used in combination with borderless printing: special page layouts, centering originals, and
printing cut lines on rolls.
•
If Fit Paper Size or Print Image with Actual Size (Windows only) is selected while performing borderless printing,
Rotate Page 90 degrees (Conserve Paper) cannot be selected. Note that if borderless printing is possible, then
even if the original is rotated 90 degrees, it will be printed by automatically rotating the page by 90 degrees.
Choose the method of borderless printing that suits the original, as desired.
• Print Image with Actual Size
Prints originals at actual size, without enlarging or reducing them. We recommend when focusing on image quali-
ty. You should create the original at a size larger by 3 mm on each side than the paper size.
Note
•
Not all page sizes are available.
•
When performing borderless printing without using Print Image with Actual Size , the image deteriorates slightly
because the image is automatically enlarged.
For instructions on borderless printing of photos and images at actual size, refer to the following topics, as appro-
priate for your computer and operating system.
•
Borderless Printing at Actual Size (Windows)
➔
P.72
iPF6400SE Borderless Printing at Actual Size
User's Guide
Enhanced Printing Options
Printing at full size
71