Canon imagePROGRAF iPF6400SE, Руководство пользователя

Страница: 376 / 684

Specifying the Cutting Method for Rolls
Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Cutting Method Printer Setting Driver Setting
Automatic The roll is automatically cut by the Cutter Unit follow-
ing printer driver settings. Media
Menu
> Pa-
per Details
> (Various
Types of
Paper) >
Cutting
Mode
Automatic Automatic
Cutting
(See " Cut-
ting Roll
Paper After
Print-
ing
.")
➔
P.144
Yes
Eject (when
the paper
surface is
being
scratched /
to wait for
ink to dry) Select this to move the cutter by key operation and
cut paper. Although there are cases with
Automatic
in which the paper falls and the paper surface is
scratched, you can avoid damaging the paper with
this method since you can cut by holding the paper
with your hand so that the paper does not fall when
cutting. Also, since you can cut while visually con-
firming the drying of the ink, you can avoid ejecting
paper before the ink has dried.
To cut the roll with the Cutter Unit, press the
Cut but-
ton.
Eject Yes
Manual
(when using
media that
cannot be
cut with the
Cutter Unit ) Select this for paper that cannot be cut with the Cut-
ter Unit and for paper of which the leading edge curls
strongly and rubs the printhead.
Cut each page from the roll using scissors. For con-
tinuous printing (if you will cut each page later), se-
lect
Automatic Cutting > Yes or select Print Cut
Guideline .
Manual No , Yes , Print
Cut Guideline
Paper cut-
ting (to have
the roll cut
at your
specified
position)
Choose this option if you want to cut pages by press-
ing Cutter Unit buttons for manual cutting after print-
ing when
Automatic Cutting > No is selected or
Print Cut Guideline is selected in the printer driver.
Otherwise choose this option if you want to cut the
roll edge after loading a roll.
Cut button
pressed
Yes No , Print Cut
Guideline
Note
•
Automatic and Eject are valid only when you have selected Automatic Cutting > Yes in the printer driver.
•
With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
•
Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the
preset cutting mode.
•
If documents printed using Automatic, Eject, or manual cutting are short, rolls are advanced a specific amount before
cutting to prevent problems with cutting and paper ejection. This may create a wider bottom margin, in some cases.
Cut rolls manually in the following cases:
Specifying the Cutting Method for Rolls iPF6400SE
User's Guide
Handling and Use of Paper
Handling rolls
376