Canon imagePRESS C7011VPS series, Руководство по эксплуатации

Страница: 37 / 391

IMPORTANT
• Punching is available only if the Puncher Unit-BB1 or Professional Puncher-B1 is attached.
• Only the following paper size can be hole punched:
A3, B4, A4, A4R, B5, or B5R / 11" x 17", LGL, LTR, LTRR, or EXEC
• If only the optional Puncher Unit-BB1 is attached, the machine automatically selects how
many holes to punch depending on the selected paper size.
- Two holes in case of LGL and LTRR
- Three holes in case of 11" x 17", LTR and EXEC
• Holes cannot be punched in paper heavier than 201 g/m² / 54 lb bond, vellums, transparencies,
labels, or prepunched paper.
• Paper that is fed from the optional Document Insertion Unit-C1 cannot be hole punched.
NOTE
The distance between the punch holes is shown in the illustration below.
4 1/4"
(108 mm)
4 1/4"
(108 mm)
2 3/4"
(70 mm)
[11] Puncher Unit-BB1 (3 holes, 2 holes)
• Folding without stitching
Folding folds multiple sheets in 2-folds.
5
4
3
2
1
1
[12] Originals at the left-hand side, copies at the right-hand side.The paper is saddle folded with a maximum of 5
sheets.
IMPORTANT
• Saddle folding is available only if the Saddle Finisher-AJ2 is attached.
• The paper is saddle folded with a maximum of 5 sheets (80 g/m²), and then output.
• The sizes of paper that can be used with saddle folding are:
- 330.2 mm x 482.6 mm, 320 mm x 450 mm (SRA3), 304.8 mm x 457.2 mm, A3, B4, A4R, and
irregular size paper (210 mm x 279.4 mm to 330.2 mm x 487.7 mm).
- 13" x 19", 12.60" x 17.72", 12" x 18" , 11" x 17", LGL, LTRT and irregular size paper (8 1/4" x 11"
to 13" x 19 13/64").
NOTE
The following are paper sizes that can be output to the output trays of the machine. However,
some paper sizes may not be output, depending on the set functions.
Input options
Paper size Upper tray Lower tray Booklet tray
A3
4
The stacker/stapler, optional inserter and optional integrated punch unit
Chapter 2 - Main parts 37