Canon imagePRESS C1 P, Руководство по обслуживанию, Страница: 653 / 1265

Chapter 11
11-8
The SMS login method settings are done by setting the login Start/ Stop via the other login method. In other words, the password authentication Start/ Stop setting
is done by first logging in with RLD authentication, and the RLS authentication Start/ Stop setting is done by first logging in with password authentication. The
Start/ Stop combinations of the two login methods are as follows.
T-11-13
Setting for login by Password Authentication
The procedures for changing the password authentication Start/ stop settings are as follows.
1) Access SMS by RLS Authentication from the PC browser on the same network as the MEAP device.
URL: http://<IP address of MEAP device>:8000/sms/rls/
Ex.) http://172.16.188.240:8000/sms/rls
Login screen (In case authentication method is SSO-H)
F-11-7
Start RLS Authentication Stop RLS Authentication
Start Password Authentication Login available with either method Login available only with
Stop Password Authentication Login available only with RLS Authentication Setting unavailable
If only login via RLS is programmed, login may be disabled for the following reasons.
- authentication server is down
- network problem, no communication with authentication server
In the event of either of these cases, try the following.
1. If local device authentication is active, try logging in with local device authentication.
2. If only domain authentication is active, launch in MEAP safe mode from the device service mode.
After launching in MEAP safe mode, the Default Authentication will become active, and you will be able to login to SMS with password authentication.
After logging into SMS, set the password authentication login to ON (active) and restore the device from MEAP safe mode to normal mode. Until the problem
blocking authentication is resolved, log into SMS with password authentication.