Canon imagePRESS C1 P, Руководство по обслуживанию, Страница: 1027 / 1265

Chapter 16
16-130
12. SYSTEM
T-16-133
ITB-ROT Execute the ITB idling.
Execute the ITB idling to prevent incorrect rolling of ITB when keeping the machine in the
storage for a long time.
1) When selecting the item to highlight and pressing OK key, the operation is started.
2
ATR-EX Forcibly execute the ATR control.
Forcibly execute the ATR control when the correction value for the ATR control is lost after the
E020 error occurs or the DC controller is replaced in the field maintenance service.
1) When selecting the item to highlight and pressing OK key, the operation is started.
2
INTR-EX Forcibly execute the initial rotation as first power-on.
Forcibly execute the image stabilization control which is executed at the initial rotation as first
power-on.
This mode executes the following image stabilization control.
Electric potential control
Primary transfer ATVC
Developer idling
Patch electric potential control
This operation is executed for approximately one minute.
1) When selecting the item to highlight and pressing OK key, the operation is started.
2
COPIER>FUNCTION>SYSTEM
Subheading Contents Level
DOWNLOAD
Switch the mode to the download mode.
Operation method
1) Select this item.
2) Press the OK key. The machine enters the download mode and waits for a command (waits for
connection). (In this status, STAND-BY (or STNDBY) is displayed next to the small item of
DOWNLOAD.)
3) Perform download using the service support tool. (CONNECTED is displayed during
communication with a PC.)
4) When communication ends, HOLD is displayed. (While HOLD is displayed, the power can be
turned off.)
1
COPIER>FUNCTION>MISC-P
Subheading Contents Level