manualshive.com logo in svg

Canon imagePRESS C1 P, Руководство по обслуживанию, Страница: 1236 / 1265

Поделиться
Скачать
Canon imagePRESS C1 P Скачать руководство пользователя страница 1236

Chapter 17

17-11

Turn on the main power switch while holding down the keys 2 and 8. In response, the machine will start up in safe mode.

17.2.4 Making Connections (USB device in use)

0013-8216

imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+

[Requirements]

- USB device to which the system software has been copied.

[Procedure]

1) Check to make sure that the Execute/Memory on the control panel is off; then, turn off the main power switch as follows:

1-1) Hold down the control panel power switch for 3 sec or more.

1-2) Go through the shut-down instructions appearing on the control panel screen so that the main power switch may be turned off. (The main power will go off

automatically.)

2) Connect the USB device [2] to the USB port [1].

F-17-14

3) If a network cable is connected to the machine, disconnect it.

4) Set the machine to the appropriate download mode:

- Normal Mode

Turn on the main power switch while holding down the keys 1 and 7.

When the machine has started up, make the following selections in service mode, and press [OK]: 

COPIER > FUNCTION > SYSTEM > DOWNLOAD.

- Safe Mode

Turn on the main power switch while holding down the keys 2 and 8 so that the machine will start up in safe mode.

5) See the following menu appearing on the control panel screen, indicating that the machine has recognized the presence of a USB device.

F-17-15

The machine may not recognize certain types of USB device or USB device from certain manufacturers. The machine looks for a USB deivce for a maximum of

60 sec after its main power is turned on, not indicating the menu if it fails to detect one. (If such is the case, obtain an appropriate USB device.)

The SST cannot be run while the USB device is in use. (The machine will not communicate with the SST when it detects the presence of a USB device.)

IF opening/closing the decurler while the USB memory has been connected to the host machine, the decurler may hit the USB memory. Thus, be sure to remove

the USB memory before moving to next work. 

17.3 Formatting the HDD

17.3.1 Formatting All Partitions

0013-8217

imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+

[1]

[2]

Содержание imagePRESS C1 P


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов