5-28
COPYRIGHT © CANON ELECTRONICS INC. 2011
CANON P-215 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
VI. AFTER REPLACING PARTS
Some of the parts used in this machine
require adjustments and settings after being
replaced. The object parts are shown below.
Perform a feed and image check after
replacing parts or disassembling/
reassembling. When there is malfunction,
perform measures.
1) Control PCB
In the service mode, execute [All Ad-
justment], change the [Counter] value
and input the serial number into [Check
device].
2) Reading Unit
In the service mode, execute [All Ad-
justment].
3) Registration Related Parts
Execute [Regist sensor adjustment] and
then [Registration Adjustment[Auto]]
after replacing the start switch PCB on
which the registration sensor is installed
and the base unit on which related parts
are mounted.