Canon imageCLASS LBP325dn, Руководство по обслуживанию

Страница: 212 / 252

E602-1602-- File system could not be initialized normally. (CDS-related)
Detection Description File system could not be initialized normally
Remedy
1. Turning OFF and then ON the main power executes auto recovery.
* When this error occurs, the firmware downloaded by the CDS Updater will be lost.
E602-1612-- Device access error (CDS-related)
Detection Description Device access error
Remedy 1. Turning OFF and then ON the main power executes auto recovery.
* When this error occurs, the firmware downloaded by the CDS Updater will be lost.
E602-1613-- Device access error (CDS-related)
Detection Description Device access error
Remedy 1. Turning OFF and then ON the main power executes auto recovery.
* When this error occurs, the firmware downloaded by the CDS Updater will be lost.
E604-0000-- Insufficient memory capacity
Detection Description Insufficient memory capacity
Remedy 1. Replace the Main Controller PCB.
E604-0001-- Memory error
Detection Description Memory required to start PDL cannot be allocated.
Remedy 1. Replace the Main Controller PCB.
E616-0001-- MEAP application is lost.
Detection Description MEAP application is lost.
Remedy 1. Select Function.gr > MEAP > MEAP FUNCTION = ON, and turn OFF and then ON the main
power.
* The setting is switched to the following after reboot.
• Initial screen setting: Native
• MEAP authentication: Off
• USB-Host setting: Native
• CDS-related: Off
E616-0002-- System error
Detection Description System error
Remedy 1. Execute Setup > Initialize Menu to initialize NVRAM.
E730-100A-- System error
Detection Description System error
Remedy
1. Turn OFF and then ON the power.
2. Replace the Main Controller PCB.
E730-C000-- An error, such as failure in memory retrieval at initialization, occurred.
Detection Description An error, such as failure in memory retrieval at initialization, occurred.
Remedy 1. Turning OFF and then ON the main power executes auto recovery.
E730-C001-- An error occurred when accessing the controller.
Detection Description An error occurred when accessing the controller.
Remedy 1. Turning OFF and then ON the main power executes auto recovery.
E730-D000-- An error, such as failure in memory retrieval at initialization, occurred.
Detection Description An error, such as failure in memory retrieval at initialization, occurred.
Remedy
1. Turn OFF and then ON the power.
2. Replace the Main Controller PCB.
E730-D001-- System error
Detection Description System error
Remedy 1. Turn OFF and then ON the power.
2. Replace the Main Controller PCB.
8. Error/Jam/Alarm
202