Canon G2010 Series Скачать руководство пользователя страница 232

Страница: 232 / 296

Printing Does Not Start

Check1

Make sure printer is turned on.

If not, make sure the printer is securely plugged in and press

button to turn on.

The

lamp flashes while the printer is initializing. Wait until the

lamp stops flashing and remains lit.

Note

• If you are printing large data such as photos or other graphics, printing may take longer to start. The

lamp flashes while the computer is processing data and sending it to the printer. Wait until printing starts.

Check2

Make sure USB cable is securely plugged in to printer and computer.

When the USB cable is securely plugged in, check the following:

• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the

computer, and retry the printing. If printing starts normally, there is a problem with the relay device. Contact
the vendor of the relay device.

• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.

Check3

If printing from a computer, delete jobs stuck in print queue.

Deleting the Undesired Print Job

Check4

Is your printer's printer driver selected when printing?

The printer will not print properly if you are using a printer driver for a different printer.

Make sure "Canon XXX series" (where "XXX" is your printer's name) is selected in the Print dialog box.

Note

• To make the printer the one selected by default, select

Set as Default Printer

Check5

Check the size of print data.

If the print data is large, part of image data may be cut off and printing failure may occur.

Click

Print Options

Page Setup

sheet of the printer driver. Then set

Prevention of Print Data Loss

the dialog that appears.

Important

• Selecting

for

Prevention of Print Data Loss

may reduce print quality.

Check6

If printing from a computer, restart the computer.

232

Содержание G2010 Series









































































































































































































































































































Результаты поиска

Содержание G2010 Series

Отзывы:

Похожие инструкции для G2010 Series

Бренды по названию

Популярные бренды

Canon G2010 Series, Онлайн-руководство

Результаты поиска

Содержание G2010 Series

Отзывы:

Похожие инструкции для G2010 Series

Бренды по названию

Популярные бренды