Canon FAX-JX500, Руководство пользователя

Страница: 47 / 336

43 Using TAM Mode (FAX-JX500/JX300 only)
E
N
GL
IS
H
Remote Control Features
Use these features when you call home to play back any messages you may have received. You can
also use the remote control features to set <TAM MODE>.
You must register a four-digit PIN as your password before you can use these features.
„
Registering the Password for Remote Control
1
Press [Menu].
2
Use [
]
] or [
_
] to select <DATA REGSTRATION>, then press [Start]. The LCD
displays <USER SETTINGS>.
3
Use [
]
] or [
_
] to select <TAM SETTINGS>, then press [Start]. The LCD displays
<MESSAGE LENGTH>.
4
Use [
]
] or [
_
] to select <PASSWORD>, then press [Start]. The LCD displays
<PASSWORD XXXX*>.
*The default setting is 1234.
5
Use the numeric buttons to enter a four-digit PIN as your password, then press
[Start].
6
Press [Stop].
Registration ends and the fax returns to standby mode.
„
Using Remote Control
1
Call home.
2
The outgoing message will be played.
3
Press [#] while the outgoing message is playing. Enter your password when you
hear the beeps indicating that you should enter your password.
When your password is accepted, you will hear a confirmation tone (a short series
of beeps).
4
The fax will now accept remote control commands (see “List of Remote Control
Commands” on page 45).
For example, press [1][1][#] to play back any telephone messages you may have received.
When playback has finished, press [9][9][#] to end the remote control.
5
End the remote control and hang up the Handset.