Canon EOS M2, Инструкция по эксплуатации

Страница: 327 / 364

327
Troubleshooting Guide

With <
F
> (Handheld Night Scene) or <
G
> (HDR Backlight Control)
shooting mode, the maximum burst for continuous shooting will greatly
decrease (p.85).

With ISO 12800 or “ H ” (equivalent to ISO 25600), the maximum burst
for continuous shooting will greatly decrease (p.103).

With [ Chromatic aberration: Enable ], the maximum burst for
continuous shooting will greatly decrease (p.160).

During WB bracketing, the maximum burst for continuous shooting will
decrease (p.172).

Set [
A
4: High ISO speed NR ] to [ Standard/Low/Disable ]. If it is set
to [ High ] or if [ Multi Shot Noise Reduction ] is set, the maximum burst
during continuous shooting will greatly decrease (p.155).

If you shoot something that has fine detail (such as a field of grass), the
file size will be larger and the actual maximum burst may be lower than
the number mentioned on page 98.

Under [
5
4: Custom Functions (C.Fn) ], if [ 3: Highlight tone priority ]
is set to [ 1: Enable ], ISO 100 cannot be set. If [ 0: Disable ] is set, ISO
100 can be set (p.289). This also applies to movie shooting (p.179).

Under [
5
4: Custom Functions (C.Fn) ], if [ 3: Highlight tone priority ]
is set to [ 1: Enable ], the [ H ] ISO speed (equivalent to ISO 25600)
cannot be selected even when [ 2: ISO expansion ] is set to [ 1: On ]. If
[ 0: OFF ] is set, ISO speed [ H ] can be set (p.289).
The maximum burst during continuous shooting is lower.
ISO 100 cannot be set.
ISO speed [H] (equivalent to ISO 25600) cannot be set.