Canon EOS M2, Инструкция по эксплуатации

Страница: 151 / 364

151
Auto Exposure Bracketing
t
4 Take the picture.

Press the shutter button completely. The
three bracketed shots will be taken in this
sequence: standard exposure,
decreased exposure, and increased
exposure.

Follow steps 1 to 3 to turn off the AEB level display.

The AEB setting will also be canceled automatically if the power is set to
<
2
>, flash recycling is completed, etc.

Using AEB with continuous shooting
If [
i
] continuous shooting (p.124) is set and you press the shutter button
completely, the three bracketed shots will be taken continuously in this
sequence: standard exposure, decreased exposure, and increased
exposure.

Using AEB with (
u
) single shooting
Press the shutter button three times to take the three bracketed shots. The
three bracketed shots will be shot in the following sequence: standard
exposure, decreased exposure, and increased exposure.

Using AEB with the self-timer or a Remote Controller (sold
separately)
With the self-timer or a Remote Controller ([
Q
] or [
l
]), you can take
three continuous shots after a 10-sec. or 2-sec. delay. With [
q
] (p.126)
set, the number of continuous shots will be three times the number set.
Canceling AEB
Shooting Tips
AEB can also be set with [
A
3: Expo.comp./AEB ].

AEB cannot be used with flash, Multi Shot Noise Reduction, Creative filter
shooting, and bulb shooting.

If [
A
3: Auto Lighting Optimizer ] (p.153) is set to any setting other than
[ Disable ], the effect of AEB may be minimal.